The "Indian Valley" Upgrade Standard
The Failure (What You Have)
- ❌ Zinc/Aluminum Spikes: Smooth shank nails that pull out easily.
- ❌ Fascia-Only Mount: Attached only to the 1" trim board, not the frame.
- ❌ Wide Spacing: Hangers every 36"+ (Too weak for PA ice).
The Upgrade (What We Install)
- ✓ 316-Stainless Screws: Threaded marine-grade steel that never rusts.
- ✓ Rafter-Tail Anchor: Long-shank screws bite into the roof truss.
- ✓ High-Density Spacing: Hangers every 18-24" for maximum load bearing.
Our Core Repair Services
1. Structural Re-Hanging
We remove all old hardware, re-pitch the gutter with a digital level for proper drainage, and install new stainless brackets.
Best for: Loose/Sagging Gutters2. Fascia Board Replacement
If the wood behind the gutter is soft or rotted, we cut it out and replace it with PVC or pressure-treated lumber before re-hanging.
Best for: Rot/Water Damage3. Miter & End-Cap Resealing
Leaking corners cause siding rot. We strip the old silicone and apply commercial-grade Geocel sealant for a watertight bond.
Best for: Drips/LeaksRepair FAQ
How do I know if I need repair or replacement? ▼
If the aluminum trough itself is bent, cracked, or crushed (usually by a tree limb), it needs replacement. If the metal is straight but pulling away from the house, it just needs Repair & Reinforcement.
Do you paint the fascia board? ▼
We install primed white wood or PVC trim. We do not offer cosmetic painting services, but our materials are paint-ready for your painter.
Don't Let It Fall.
A loose gutter can rip the fascia right off your house. Secure it today.